Skip to content

Imer Masonry/Stone 350 Smart Cut

by Imer
$2,470.00
SKU

Freight delivery rules and guidelines

MS 350 Smart 14" Masonry Saw

Cutting bricks, blocks, paving stones, or tile is a breeze on the biggest cutting table available on a 14” Masonry Saw. The Smart Cut 350 delivers very accurate cuts up to 30” in length, and 4 ¾” deep. This is one very versatile saw! The all new 2 h.p. motor provides plenty of power. Remember, always check your jobsite voltage and use a 10 gauge cord, you want to be able to take advantage of all that horsepower!

Features

  • Blade sold separately
  • Large stainless steel protractor
  • Cutting table surface is pressed board for rigidity and longevity
  • The rigid single arm design is very versatile
  • The new stand folds up and out of the way with a spring loaded assist. Your stand is always rock solid and ready to go!
  • Each 350 Smart arrives with a wheel-kit mounted in place and ready to go, moving the 350 Smart around the jobsite is quick and easy
  • Should your 350 Smart ever come out of alignment it is easy to adjust the cutting head, as it rides inside an alignment collar which can be adjusted left to right and up and down
  • Sharp, accurate cuts are always delivered pass after pass, year after year
  • The blade guard is lined with sound absorbing material used in the boat building industry, and this greatly reduces noise from the blade
  • The blade guard may be removed with just two thumb screws changing blades is fast and easy
  • The cutting tray rolls back and forth on ceramic nylon rollers with sealed bearings, this system is first class!
  • The cutting action is smooth and consistent, while one roller is mounted under the guide bar to ensure the cutting tray does not jump up and down, or fall off the saw and get left behind at the job-site!
  • The water pan is made of shatter resistant plastic and is protected by the frame of the saw
  • The pump resides in a protected sump pocket, thereby pumping the cleanest water possible 

 Imer Smart Masonry/Stone Saw Specifications
Blade diameter (Blade sold separately) 14"
Blade shaft diameter 1"
Motor 2HP, 110 Volts / 15 Amps
Max. cutting length (w/plunge cut) 26" (30")
Max. cutting depth 4-3/4"
Cutting table dimensions 20” x 16”
Cutting surface height 33.5”
Motor speed 2,850 r.p.m.
Weight (boxed) 175 lbs. (215 lbs.)
Water pan capacity 10 gal.
Water pump flow 3 g.p.m.
Length 47" (48”)
Height 51" (55")
Width 28.5" (29")