What factors should I consider when choosing a trowel size for tile installation?

One of the most crucial aspects of tile installation is choosing the right trowel size. Various factors such as the shapes and sizes of the trowels, the types of notches, and the tile size and placement should be considered.

What is the importance of the tile placement in selecting the trowel size?

Tile placement significantly affects the trowel size selection. For instance, if you're laying tiles on the floor, the mortar bed needs to be thicker to withstand foot traffic. Likewise, if the surface you're laying tiles on slopes a bit, you would need to back-butter or spread out your mud-bed slightly thicker.

What is the general guide to the size of trowel based on the tile size and placement?

Here is a general guide to the size of trowel to use based on the tile size and placement: 3/16″ to 1/4″ V-notch: Mosaics tiles up to 4-1/2″ glazed wall tile. 1/4″ x 1/4″ U or Square notch: 4″ to 8″ tile. 1/4″ x 3/8″ U or Square notch: 8″ to 16″ tiles. 1/2″ x 1/2″ U or Square notch: 16″ and larger.

What are the different types of notches, and how do they affect tile installation?

There are three primary types of notches - V-shape, U-shape, and square-notch. V-shape spreads less thinset than the same-sized square-notch, while the U-notch spreads out more than the v-notch but less than the square-notch. The major difference is how the thinset lies, affecting tile adhesion. Choosing the right trowel size is crucial for successful tile installation. The trowel size should match the tile size, and the type of notch you use will affect the concentration level of thinset. Also, consider the placement of the tiles and the surface you'll be laying them on to determine the appropriate trowel size.

What should I keep in mind for a successful tile installation?

To really understand which trowel type to use, and how to properly use it, watch the video provided. Keep in mind that choosing the right trowel size is crucial for a successful tile installation. The trowel size should match the tile size, and the type of notch you use will affect the concentration level of thinset. Also, consider the placement of the tiles and the surface you'll be laying them on to determine the appropriate trowel size.

Imer Mortarman 750 MBP (Mini Batch Plant)

SKU 1194648

by Imer

$13,719.99 - $13,719.99

$13,719.99

$13,719.99 - $13,719.99

$13,719.99

Quantity

Mortarman 750 Mortar Mixer

This mixer doubles as a mini batch plant for the precast industry. This vertical shaft mixer is capable of handling dry pack, grouts, thin sets, stuccos, self-leveling materials, and mortar.

Features

Free shipping from IMER factory warehouse

Mixes 1600 lbs of mortar, dry pack, stucco, or sand & cement

Mix concrete, max aggregate size is 3/8"

5 hp 220 V single phase or 7.5 hp 3 phase 220 V

One piece hinged grate with auto shutoff that stops paddles

Low & wide design for towing safety and speed

Can mix materials from dry to wet

Discharge outlet height 30"

Drum diameter 52"

Imer Mix 750 Batch Plant Specifications

Drum capacity	27 cubic feet
Batch output	17 cubic feet (est 1,700lbs )
Gas motor w/ centrifugal clutch	13 HP Honda w/ electric start
Electric motor 220 Volt	5 HP 1 phase / 7.5 HP 3 phase
Drum diameter	51"
Maximum aggregate size	3/8" minus
Discharge outlet height	30"
Pneumatic tires	22"
Weight	1,700lbs
Dimensions L x H x W	90" x 62" x 63"
Shipping Pallet Dimensions L x H x W	86" x 64" x 64"

Imer Mortarman 750 MBP (Mini Batch Plant)

Mortarman 750 Mortar Mixer

Features

QUESTIONS & ANSWERS

Have a Question?

Added to your cart: