Skip to content

Rapid Recess Bracket System Drain Kit

$399.00
SKU RR25SF
Choose Your Drain Type

Rapid Recess Bracket System Drain Kit

The first step to a curbless shower. A bracket system designed to provide the necessary depth to install a true, zero-entry curbless shower on a wood subfloor. Works with both linear and point drains.!

 

Features

  • Metal brackets for lowering plywood floors to create a curb less shower
  • Installed from above the joists without the use of a 2×4 frame or compromising the structural integrity of the joists
  • Rapid Recess doesn’t interfere with plumbing or other obstacles between the joists
  • Floor height within the shower area is recessed 11/16″ inch
  • Suitable for 25 square feet or less – recommended sizes are 5′ x 5′ or 4′ x 6′
  • No framing ledger boards or cross-bracing needed
  • When installing the linear drain kit, one joist bay will be deeper than the others to accommodate the depth of the linear drain body
  • Joist orientation must be considered since the drain body will always be parallel to the joists
  • Complies fully with ICC standards and codes
  • Rapid Recess brackets are made of sturdy 16 gauge galvanized steel
  • Rapid Recess products have undergone thorough testing and passed the Robinson Test C627 for floor assemblies
  • Compatible with all wood construction conditions including standard lumber, I-joists and trusses with 3⁄4” plywood subfloor
  • Can only be used with 3/4″ plywood subfloor
  • Drain Not Included
  • Manufactured in the USA

What’s In The Box

RR25SF Point Drain Kit 

  • M bracket- 47 3/8″ long main bracket fastened to the top of floor joists (x10)
  • Z bracket- 5” long side bracket used for wall to recess and main floor to recess transitions (x30)
  • #10 1 5/8” wood to metal self-drilling screws with wings (2 packages of 80 pieces)
  • #10 2 3/4” wood to metal self-drilling screws with wings (x40)
  • #8 x 1 1/4” Flat-head Phillips screws (x60)

 

RR25LDK Linear Drain Kit

  • M bracket- 47 3/8″ long main bracket fastened to the top of floor joists (x8)
  • Z bracket- 5″ long side bracket used for wall to recess and main floor to recess transitions (x22)
  • ML bracket- 47 3/8″ long main bracket fastened to the top of last floor joist (x2)
  • ZL bracket- 5” long side bracket used for wall to recess (x8)
  • #10 2 3/4” wood to metal self-drilling screws with wings (x40)
  • #10 1 5/8” wood to metal self-drilling screws with wings (2 packages of 80 pieces)
  • #8 x 1 1/4” Flat-head Phillips screws (x60)